Korean

Product

ANTI-NOISE INSULATION PARTS

Interior

Exterior

INTERIOR TRIM PARTS

TRUNK TRIM PARTS

ANTI-ENGINE NOISE PARTS

FOR ANTI-NOISE INSULATION PARTS

Dash inner for interior
It is located inside the automobile to reduce noise from the engine room. Since the higher level of NVH performance is required due to high performance of automobile engines, the best products are produced through structural and material diversification and continuous research.

FOR ANTI-NOISE INSULATION PARTS

Dash outer for interior
It is located in the automobile engine room and blocks noise from the engine to reduce indoor noise. The fuel efficiency is improved through low-weight, high-performance products by applying PU materials, and the multi-layer structure is applied to improve the performance of NVH.

FOR ANTI-NOISE INSULATION PARTS

Fender for interior
It provides a comfortable driving with silent indoor by blocking the wind noise that flows between the door panel and fender panel while driving. PU materials are used to improve fuel efficiency by enhancing adhesion to the body panel space and using the low-weight, high-performance product.

FOR ANTI-NOISE INSULATION PARTS

Under Cover for exterior
It reduces the wind noise generated from the lower part of the automobile and facilitates air flow to improve fuel efficiency. It prevents damages to the engine room due to foreign substances on the road while driving.

FOR ANTI-NOISE INSULATION PARTS

Heat Protector for exterior
It is located on the outside of the tunnel panel to reduce road-noise generated while driving and exhaust noise. It applied lightweight and heat-resistant materials that substitute metal materials to produce a low-weight, high-performance product and improve fuel efficiency.

FOR ANTI-NOISE INSULATION PARTS

Hood for exterior
It is located in the automobile engine room hood panel and reduces both indoor and outdoor noise by absorbing noises generated from the engine. The production of low-weight, high-performance products by applying PU materials improves the fuel efficiency of automobiles.

FOR INTERIOR TRIM PARTS

Module Headliner for interior
It reduces noise and vibration that flow through the ceiling from the outside of the automobile, and absorbs noise generated indoor to provide a comfortable driving. It is a module product that combined a low-weight headliner made of PU materials with built-in lamp, wiring, and roof assist handle, which contributes to improving productivity by shortening the in-line assembly time of automobiles.

FOR INTERIOR TRIM PARTS

Floor Carpet for interior
It is closely attached to the floor panel of the automobile to improve indoor quiteness by reducing the inflow of external noise while driving, and harmonizes the indoor environment to provide a comfortable driving. The product has diversified carpet fabrics to improve its exterior and durability and applied PU materials and body adhesion structure of insulation to improve NVH fuctions.

FOR INTERIOR TRIM PARTS

Package Tray for interior
"It provides the convenience to passengers with its beautiful interior design and the role as a shelf. Convenience facilities, including speaker grill, ventilation grill, and curtains, are installed to improve the convenience of the automobile.

FOR TRUNK TRIM PARTS

Luggage box for interior
It is embedded in the automobile trunk or luggage room to conceal the exposure of panels and absorb noise that flows inside. By applying the partition wall, which used to be steel materials, with plastic materials(PP66), the weight was reduced and noise canceling function improved.

FOR TRUNK TRIM PARTS

Trunk Side for interior
It covers the panel of the trunk room to improve the appearance quality and reduce noise. The panel adhesion structure was applied to secure the trunk space, and fuel efficiency is improved through the production of low-weight, high-performance products by applying PU materials.

FOR TRUNK TRIM PARTS

Trunk Mat for interior
It is located on the floor side of the trunk room to reduce noise and vibration from the outside, and improves the convenience of loading small packages and space utilization. It completes the emotional quality of the exterior of the trunk by applying rigid materials that do not sag or bend when loading small packages.

FOR TRUNK TRIM PARTS

Trunk Lid for interior
It covers the panel of the trunk room to improve the appearance quality and reduce noise, and A/S cover was applied in order to improve the ease of maintainability of the rear lamp. The panel adhesion structure was applied to secure the trunk space, and fuel efficiency is improved through the production of low-weight, high-performance products by applying PU materials

FOR TRUNK TRIM PARTS

Luggage box for interior
It is adhered closely to the engine to reduce internal/external radiated sound, and minimizes heat loss during initial start-up to increase energy efficiency. The porous material was adopted to increase the surface area, and fuel efficiency is improved through the low-weight, high-heat resistant product by applying PU materials.

FOR ANTI-ENGINE NOISE PARTS

Engine room Partition system
The partition wall that is located between the engine room and dash panel prevents noise and vibration from being transmitted into the interior of the automobile. By applying the partition wall, which used to be steel materials, with plastic materials(PP66), the weight was reduced and noise canceling function improved.

FOR TRUNK TRIM PARTS

Engine Encapsulation
It is adhered closely to the engine to reduce internal/external radiated sound, and minimizes heat loss during initial start-up to increase energy efficiency. The porous material was adopted to increase the surface area, and fuel efficiency is improved through the low-weight, high-heat resistant product by applying PU materials.